Standard Svensk standard · SS-ISO 2493-1:2010

Papper och kartong - Bestämning av böjmotstånd - Del 1: Konstant nedböjningshastighet (ISO 2493-1:2010, IDT)

Status: Gällande

Köp denna standard

Standard Svensk standard · SS-ISO 2493-1:2010

Papper och kartong - Bestämning av böjmotstånd - Del 1: Konstant nedböjningshastighet (ISO 2493-1:2010, IDT)
Prenumerera på standarden - Läs mer Dölj
Pris: 875 SEK
standard ikon pdf

PDF

Pris: 875 SEK
standard ikon

Papper

Pris: 1 400 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ
Provläs denna standard
Omfattning
This part of ISO 2493 specifies procedures, based on the two-point loading principle, for determining the bending resistance of paper and board. NOTE 1 See ISO 5628[1] for a detailed description of the two-point loading principle. This part of ISO 2493 applies to the measurement of the bending resistance within the range 20 mN to 10 000 mN. It is not applicable to corrugated board but can be applicable to the components of such board. The bending angle is 15° and the bending length is 50 mm. For samples having a bending resistance that is too low to measure with a bending length of 50 mm, a shorter bending length, i.e. 10 mm, can be used. IMPORTANT — The results obtained when using different bending lengths will not be comparable. For boards that tend to be permanently deformed if bent through 15°, the half bending angle, i.e. 7,5°, can be used. NOTE 2 Taber-type testers and testers using the principle of constant rate of deflection do not give comparable results. For this reason, ISO 2493:1992 has been divided into two parts.

Ämnesområden

Papper och papp (85.060)


Köp denna standard

Standard Svensk standard · SS-ISO 2493-1:2010

Papper och kartong - Bestämning av böjmotstånd - Del 1: Konstant nedböjningshastighet (ISO 2493-1:2010, IDT)
Prenumerera på standarden - Läs mer Dölj
Pris: 875 SEK
standard ikon pdf

PDF

Pris: 875 SEK
standard ikon

Papper

Pris: 1 400 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: Fysikaliska provningsmetoder, SIS/TK 157/AG 01

Internationell titel: Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection (ISO 2493-1:2010, IDT)

Artikelnummer: STD-75930

Utgåva: 1

Fastställd: 2010-11-22

Antal sidor: 24